Wiring Diagram From Outlet To Switch

Wiring a Switch to Outlet is a job that many do-it-yourselfers can tackle. It’s easier than ever to install a switch that controls an outlet in your home, and it can be done quickly and safely with just a few simple steps. In this article, we'll go over the basics of wiring a switch to an outlet and some safety precautions to take before starting.

First and foremost, make sure you turn off the power to the outlet or circuit you're working on. You should then use a voltage tester to confirm there is no power going to the outlet from the breaker box. Once you’ve determined it is safe to proceed, remove the face plate and disconnect the wires from the outlet. Then you will need to identify which wire is the hot wire and which is the neutral wire. The hot wire is typically colored black, but it could also be red. The neutral wire is typically white. Now you can start wiring the switch to the outlet.

Using wire connectors, connect the hot wire from the outlet to the terminal of the switch. Then you can connect the neutral wire from the outlet to the same terminal as the hot wire. Finally, connect the load wire or traveler wire to the remaining terminal of the switch. Once the switch and outlet are connected, you can then reinstall the face plate and turn the power back on. Make sure to test the switch by plugging something into the outlet and turning the switch on and off. With these simple steps, you’ll have your switch controlling the outlet in no time.

How To Wire Electrical Outlets And Switches